Daily Inspection And Maintenance Of The Loader

Safety production is the premise of work, so be sure to do the daily inspection and maintenance of Track Loader. It is necessary to check the machine before and after the work every day. To ensure the safety of the work. The inspection contents are as follows:

1. Check whether the work lights, indicators, etc. are damaged, and whether the lines, pipes of electricity, gas and oil are aging or damaged.

2. Check the dust of the engine air filter to affect the air intake effect.

3. Check whether the connecting bolts of the front and rear drive shafts are loose or loose, and the locking force is 530N.M.

4. Check if the connecting bolts such as the pins are loose.

5. Check for oil leakage, water leakage, leakage, and air leakage.

6, check the water level, transmission oil level, hydraulic oil level, brake oil level.

7. Add grease to each nozzle.

8. Check the brake pad wear.

9. Check the wear of the bucket blade and the tooth. When the blade wears 10cm and the tooth wear exceeds 1/4 of the full length, it needs to be repaired or replaced.

We have Track Loader China Factory, you can also visit our company to learn more product information.