How To Avoid Rollover Accidents During Excavator Construction?
Nov. 18, 2020
During the construction of Track Excavator, rollover is one of the most common accidents. Due to the light and narrow body of the excavator, it is more prone to rollover than a large excavator. How to avoid the side when the excavator is constructed? There are three main points:
First, Due to the off-road nature of the Excavator, the excavator can climb steep slopes by rail and work equipment. It can also easily descend downhill. Everyone can easily ignore the dangerous situation. When the mini excavator goes downhill or along the trailer At this time, many drivers will push the front windshield or door frame with their left hand and push the excavator with their right hand. At this time, if the door is open instead of locked, the door will close quickly due to gravity, which is usually Great strength. The handheld on the door frame will be caught. Very serious consequences.
Therefore, when the Wheel Excavator is working, there is a lock on the door of the excavator. When it is opened, there is a lock. Whether the door is open or closed, it must be locked. The driver should try not to grab the door frame.
Excavators
Second, When you walk, you can hold the boom. There are many novices or apprentices who think that the boom of the mini excavator is the highest, the pole is completely open, the bucket is facing the sky, so the line of sight will be when walking Better, if you walk, it will be cool. It is very dangerous to walk. Because the working device is higher, the center of gravity is higher. If it is slightly uneven, the ground will fall over.Therefore, don't be calm when walking and doing homework. The most important thing is to be optimistic about the road under your feet.
Third, Driving on soft soil. When Excavators work on soft lands , first test the ground with a bucket to see if the ground can withstand the weight of the excavator. If you forget the process, unless you are driving Amphibious excavators, otherwise serious consequences may occur. Although excavators are designed for crawler excavators, the contact area with the ground is large, but excavators occur in accidents in the soil! To avoid small excavators Trapped when working on soft soil such as swamps or river beaches.
